Archives for: "March 2014"
29/03/14
Since we have already prepared the case, installing the motherboard into the case should be fairly easy.
Mount the Motherboard onto the Standoffs
Put the motherboard into the case, and set it onto the open screw holes which have been created by the sta… more »
Form is loading...
28/03/14
The next step is to get the memory installed and this is a very easy step.
Remove the memory from the packaging and notice the number of pins on the bottom of the memory module. One side will have more pins than the other side, and there will be a larg… more »
You must be logged in to see the comments. Log in now!
If you have no account yet, you can register now...
(It only takes a few seconds!)
Form is loading...
Now we are getting started! This isn't very hard is it?
Inspect the CPU
Before installing the CPU, we recommend that you take it out of the packaging and verify that you have received the correct one that you ordered. With all of the different core type… more »
You must be logged in to see the comments. Log in now!
If you have no account yet, you can register now...
(It only takes a few seconds!)
Form is loading...
27/03/14
It may not even be necessary to do anything on this step, depending on the age and type of your motherboard.
Motherboards over time have lost many of the 'jumpers' that were required for configuring the board. Most of the setup is done with the BIOS (Ba… more »
You must be logged in to see the comments. Log in now!
If you have no account yet, you can register now...
(It only takes a few seconds!)
Form is loading...
If the case that you bought already has a power supply installed, then you can skip this step. If not continue on below.
Take the power supply out of the box and make sure to switch to 115v if it is not already (If you are outside the United States, th… more »
You must be logged in to see the comments. Log in now!
If you have no account yet, you can register now...
(It only takes a few seconds!)
Form is loading...
You must be logged in to see the comments. Log in now!
If you have no account yet, you can register now...
(It only takes a few seconds!)